8 Aug, 2022

Can A Trampoline Be Placed On Concrete?

You can put your trampoline on concrete. If your backyard lacks sufficient grassy or smooth surface, you will place your trampoline on a concrete surface. This is not a problem, however, it is not a good idea.

There are numerous reasons why experts and experienced individuals do not recommend placing a trampoline on a concrete surface.


Major causes include

  • severe injuries or even death.
  • Trampoline motion and frame fracture

Serious Injuries Or Death May Occur

We are aware that the world’s population is expanding on a daily basis, resulting in limited space for gardens.

Some individuals may not even have yards, while others have yards but insufficient green grounds.

This does not mean that we should disregard safety and health for the sake of brief enjoyment in any of these situations.

Children like jumping on trampolines without considering their safety.

They do not consider the placement of the trampoline. The only thing they desire is a few hours or minutes of simple entertainment.

Even adolescents and adults like jumping on the trampoline. They desire to fly as high as possible, yet must return to the surface. The same situation applies to children.

If any of them loses their footing during a leap, they will wind up in the hospital if they land on the concrete surface. This could result in severe injuries such as bone fractures.

  • Head trauma
  • Fracture of the neck
  • Fracture of the spine
  • Even death

It is risky for both those who use the trampoline and those who watch them use it.

If someone falls from a height onto them, they will get severe injuries.

These types of incidents occur not just in private residences but also in some public parks. Some parks lack a suitable grassy space, therefore management places trampolines on hard surfaces to prevent accidents.

When you jump too high and fall on the trampoline’s mat, the trampoline shrinks to the bottom, causing your feet or back to hit the ground, which can result in severe injuries or broken bones.

You could strike the ground with your head, neck, or even your spine. It is also a potential cause of death. What else could be more dangerous?

Trampoline Movement And Fracture Of Its Frame:

If you install a trampoline on a concrete surface without securing its legs, it will shift position when you jump, causing you to miss the matt and land on the concrete. This will result in severe injury.

Because the trampoline legs sink further into the earth with each jump, grassy places are recommended by experts. In this manner, they are fixed. If you plan to place a trampoline on grass, you need this guide. Prior to installing the trampoline on the concrete surface, holes must be drilled for the trampoline’s legs.

  • When individuals jump on a trampoline on a concrete surface with excessive power, the trampoline continually bends because its legs are resting on the concrete. As a result, its frame deteriorates and its joints begin to fail after one month.

Methods for placing a trampoline on concrete:

You fear for the safety of your children if you cannot purchase a trampoline because your yard is made of concrete and does not have enough grassy places. Don’t feel down.

There are numerous ways to install a trampoline in a concrete backyard. You need only identify the safest routes. These include:

  • Use fake grass.
  • Sand usage.
  • Use a trampoline net.
  • Fix its legs.

So let’s examine these suggestions.

Use Artificial Grass:

Nowadays, artificial grass is widely utilized. It is being utilized at a very high pace. Their surfaces are soft and porous.

  • Initially, it will provide a cushioned platform for a trampoline and shield its frame.
  • If someone falls from the trampoline, he or she will land on grass, not concrete.
  • It will give your yard a beautiful appearance.
  • Thus, you and your loved ones can effortlessly enjoy yourselves at home.


Sand is the most secure method for trampoline foundation softening.

If you distribute sand under and around the trampoline, it will serve as a cushioned basis for the trampoline.

  • No one will direct landing on a solid surface. The touchdown will occur on sand. Less severe injuries will occur.
  • Its legs will be buried in the sand, and it will be repaired.
  • This plan is a bit dirty, but children will like playing with sand.

Use Of Trampoline Net

If your yard is made of concrete, you should use a trampoline net. We are aware that children enjoy jumping on trampolines. They even disregard safety measures. Without a net, their likelihood of falling is significantly increased. Therefore, it is preferable to place a net around the trampoline so that the risk of falling is reduced and the user remains inside the safety zone.

Fix Trampoline Legs: If you place your trampoline on a concrete surface, and you jump on it, if its legs are not fastened, the trampoline will shift position, which is quite dangerous.

Therefore, it is best to fix its legs.

To do this, holes must be drilled on both sides of the legs of the trampoline and upper bounce safety enclosures must be used to secure the legs or poles of the trampoline to a concrete surface.

Your trampoline location will be fixed in this manner.

When someone returns to a trampoline after jumping on it, the trampoline will not shift position. Then it will be secure, and you will be able to enjoy it without reservation.


Putting a trampoline on concrete is not advised, although it is possible.

When jumping on a trampoline put on concrete, various injuries might occur, and the trampoline structure deteriorates significantly.

Therefore, it is not recommended to place a trampoline on a concrete surface.

If you do not have a spacious garden, it is prudent to install your trampoline on concrete. You can lessen the risk of falling on the floor by using safety nets around the trampoline, artificial grass mats, and rubber on hard concrete floors.

15 Jul, 2022

How to Ride a Longboard?

Learn How to Skateboard on Longboard in 7 Simple Steps

If you’ve never tried skateboarding before, learning how to ride a longboard might seem scary at first. Longboards are great for people who are just starting out because they have a big deck and a low center of gravity. If you want to try longboarding, here are some tips for getting started safely and with confidence, so you can focus on having fun.

  1. Make sure you have the right longboarding gear.


If you haven’t bought a longboard yet, drop-through and double-drop models are usually the easiest ones for beginners to use.

Safety gear is vital for beginner longboarders. As you learn, you’re more likely to make mistakes, so it’s important to wear protective gear like knee pads, elbow pads, wrist guards, and helmets. A little planning can keep you from getting hurt and help you learn with confidence.

  1. Get used to standing up on your longboard


Skaters who have never done it before should first figure out which foot goes forward naturally: the left or the right. Put your longboard on a flat, even surface to figure out what stance works best for you. Try standing with your left foot in front, then try it with your right foot in front.

Does one stance feel more natural? If you like to walk with your left foot in front, you are called a regular footer. A skateboarder who uses their right foot as their front foot is called “goofy.”

If you’re still not sure which foot is your front foot, try this: stand flat on the ground and have someone push you from behind. How did you catch yourself? With which foot? For longboarding, that foot should be your front foot.

  1. Find your balance


You can practice staying balanced on your longboard now that you know where your front foot and back foot are.

Place your longboard on a flat, textured surface, like carpet or grass, that will stop it from rolling. Place your feet about shoulder-width apart between the longboard trucks, with your front foot at a 45-degree angle and your back foot perpendicular to the skateboard.

Bend your knees to lower your center of gravity and practice moving your weight in all directions. As the skateboard deck tilts, try to adjust to it by moving your arms or shifting your weight from your front foot to your back foot.

  1. Try getting on and off of your board

When you’re on pavement, like in a parking lot, it will be harder to get on your board. Try putting your front foot on it first. Now try putting your back foot on the step first. Which made more sense?

When you feel comfortable getting on your skateboard, you can try rolling.

  1. Make a slope

Find a flat surface that slopes slightly and has a lot of flat space at the end. A handrail is helpful, but a friend can also help you stay steady as you learn. Step onto your longboard and settle in while holding onto the handrail or a friend. When you’re ready, let go, and your longboard will start to roll downhill.

Try to keep your weight low and evenly distributed across your feet as you roll so that you move in a straight line. Step off your longboard at the bottom of the hill. You’ve gone down a hill on skates! As you get more comfortable, try it without holding on and put your hands out to the sides for balance.

  1. Get used to taking off

On a flat surface, point your front foot in the same direction as your longboard, shift your weight to your front foot, and put your back foot on the ground. A couple of times, lightly push off with your back foot to get used to the move. As you start to roll, put your back foot back on the deck and move your front foot so that it is at a 45-degree angle.

  1. Get used to turning

Once you’re moving, you can turn your skateboard by slightly leaning to one side or the other. Make sure your knees are bent to keep your center of gravity low and give you more control.


  1. Try to stop

You can stop your longboard in a few different ways. Stepping off the board while it’s moving is one way to do it. This only works if you’re not going too fast. Another way is to keep your balance on your front foot and bring your back foot down to the ground. This is called “foot-braking.” Instead of pushing off, let your back foot drag so the friction slows you down.


Keep in mind that it takes time to get good at longboarding. Practice each step until you feel like you’re ready to move on. Soon, you’ll be able to go fast downhill and know how to do a few simple tricks.


15 Jul, 2022

Four Reasons KitchenAid Dishwashers Stun Us


“Dishwashing is my favorite duty,” no one has ever stated. In addition to folding laundry and cleaning the floor, wiping a dirty plate is a common candidate for the least-preferred duty. Even with a dishwasher, we know that people dread doing the dishes; yet, this may indicate that it’s time for an improvement.

When there is an effective dishwasher in the kitchen, everything improves. Our KitchenAid dishwashers provide a speedier washing cycle, convenience via smart-tech features, and calmer evenings, among many other benefits.

Discover more about the benefits of KitchenAid dishwashers for kitchen cleanup.

1.Never leave a dirty dish unattended Again

If you have a large family or frequently prepare a lot of food, your sink will be filled with dirty dishes every day. And sometimes the dishwasher is simply too small to accommodate everything.

This material is perfect for long, flat kitchen implements such as spatulas and serving utensils. Obviously, you can also accommodate food processor blades, mixer beaters, cheese graters, and other odd cooking implements with comparable shapes. This FreeFlex Third Rack is deep and can accommodate 6-inch glasses, cups, and bowls, as opposed to the Third Level Rack, which is designed for long, thin goods.

The more these additional racks are filled, the more space is created in the two lower racks, ensuring that no dirty dish is left behind.

2.Get Some Peace and Quiet Finally What could possibly go wrong?

However, you don’t have to put up with a noisy appliance during movie nights when there are quiet dishwashers available.

That means that whether you are entertaining guests, putting the baby to bed, or simply preparing to watch a television, your dishwasher will operate quietly without disturbing you. Never again wait to run a cycle with a KitchenAid appliance in your house.


3.Allow a Professional to Determine Your Cycle

Do you ever open your dishwasher after a cleaning cycle to discover that certain dishes were not properly cleaned?

During dishwashing, the system detects the level of soil on the dishes and then makes modifications in real time to optimize cleaning performance. This energy-efficient dishwasher is eco-friendly due to its ingenuity and superior performance. The ProWash utilizes less water than a typical dishwashing cycle, allowing you to save water and money on your water bill.

4.Easy on the Eyes and Simple to Maintain

In addition, the disguised top controls enhance the aesthetic appeal of this KitchenAid dishwasher. If you like a minimalist approach to kitchen design, these dishwashers will be the perfect addition to your kitchen.

When it seems impossible to escape the towering shadow of a mountain of dirty dishes in your kitchen, it’s time to purchase a dishwasher that will help you conquer the dishes and give you peace of mind. Stop wasting time washing dishes by hand when a KitchenAid dishwasher can do the hard work for you.

Please find more information in here.

13 Jul, 2022

How to connect xbox 360 to pc monitor with hdmi

Do you want to know how to connect an Xbox 360 to a PC display through HDMI to improve your gaming experience? I’ll show you how.

You did a fantastic thing by purchasing an Xbox 360 system to enjoy video streaming and games. You may not comprehend the ports and cords if you are new to Xbox systems.

Furthermore, connecting your Xbox 360 to your PC display may appear to be difficult, but don’t worry; I’ll walk you through it. Furthermore, if you’re wondering whether or not connecting an Xbox 360 to a display is costly, the answer is no.

So, let me show you how to connect an Xbox 360 to a PC display using HDMI cable.

What Is the Xbox 360 Gaming Console, and How Does It Work?

Xbox is only a gaming console with audio and video capabilities. Microsoft, along with other gaming consoles, is developing this wonderful game streaming console.

Microsoft’s Xbox 360 is the company’s second-generation console. This one quickly became the best-selling and most well-known Xbox online video game.

As a result, this system has a large number of different video games. Furthermore, such games may be played directly on the console using the controllers.

The Xbox 360 controller features 12 buttons and sensors to make your game streaming experience even better. Furthermore, the game was made cooler by the accessibility function of the buttons with digital and analogous characteristics, pressure sensors, mapping controls, and calibrating detectors.

Furthermore, the Xbox 360 system and controller have the highest accessibility because they can be connected to larger screen displays such as PCs, laptops, or televisions. This function enhances the game streaming experience by providing the optimal video-audio output for the game you’re playing.

Easy Ways to Connect Xbox 360 to PC Monitor through HDMI

The first step is to see if your computer display has at least one of the VGA, DVI, or HDMI connectors.

If you answered yes, you can proceed to connecting the Xbox 360 to the PC monitor via HDMI cable. As a result, using an HDMI cable will provide access to both digital video and audio.

After that, you must prepare to connect the Xbox 360 to the display (you can use a 21.5 inches to 120hz gaming monitor). But first, double-check that you have everything you’ll need for the procedure.

Important Considerations When Connecting Xbox 360 to Monitor:

  • Computer Display
  • Video Game Console Xbox 360
  • Audio Video Extension RCA 3.5mm Male to Stereo Female
  • Cable for High-Definition Multimedia Interface (HDMI)

If the display does not have an HDMI port, use the Xbox 360 High-Definition AV Adapter.

VGA HD AV cable (in case the display lacks both HDMI and component ports)

Prepare with these since we’re going all out with the techniques to link Xbox 360 to PC Monitor. Just acquire the cords you’ll need based on the ports on your display.

How to Connect an Xbox to a Monitor Using HDMI!

Here are the procedures to do if your display supports HDMI ports and speakers (internal or external):

  • Connect the HDMI cable to the HDMI port on the Xbox console.
  • Then connect the other end of the adapter to the monitor’s HDMI input connector.
  • Then, switch on the display and the Xbox to check the video and audio settings. Use a Bluetooth connection to receive sound from the console if the audio is external.
  • Go down for more if your PC display doesn’t have an HDMI converter port.
  • Use a Component HD AV Adapter to connect your Xbox 360 to your monitor!
  • Previously, the component HD AV cable was included with the console packages for free. It may also be used on both TVs and computer monitors.

So, here’s how to connect your Xbox 360 to your display using an HD AV cable:

To begin, change your PC monitor’s AV component connection to HDTV.

Then connect the HD AV cable’s connections to the appropriate input ports (colored). If your HD AV adapter includes an RCA composite yellow connector, don’t worry about unscrewing it.

Connect the opposite end of the HD AV cable connection to the console’s component port.

Check that it works by turning on the console, Xbox, and speaker.

Last but not least, using a VGA HD AV connection, connect an Xbox 360 console to a PC display.

VGA HD AV Cable to connect Xbox 360 to PC Monitor

If your PC display doesn’t have an HDMI or component port, use the VGA port instead. If the display does not have a VGA connector, just purchase an adaptor.

As a result, here’s how to hook up Xbox 360 to monitor using VGA HD AV cable:

Connect the AV adapter to the VGA adapter and then to the console’s AV connection port.

After that, connect the VGA connection to the VGA adapter and then to the PC monitor’s VGA port.

Now, with the VGA cable, connect the white and red audio stereo (RCA Female to Male) to the PC monitor’s audio port.

To begin gaming, turn on the display, speaker, and console.


  • Is it possible to play Xbox 360 games on a computer monitor?

Yes, you may use your PC display to play XBOX 360 games. If your monitor does not have an HDMI connector, you will need to utilize various splitters and converters to get the image and sound to work.

  • Is it possible to connect the Xbox 360 sound to a computer monitor?

If you have a monitor with built-in speakers, you may easily link the sound from your Xbox 360 to a PC monitor. If your monitor does not have built-in speakers, the process might be a little more difficult.

  • Is it possible to connect the Xbox 360 to a computer monitor without using the HDMI port?

Yes, the XBOX 360 may be connected to a display that does not have an HDMI connector. For this, you’ll need an HDMI to VGA or DVI (depending on the display connector) converter.

  • Is it possible to connect the speakers to the Xbox 360 directly?

The XBOX 360, however, lacks a 3.5mm port. As a result, the speakers cannot be connected directly to the XBOX 360. If you want to utilize it with a computer display, an HDMI splitter may be used to connect the sound.

Final Thoughts

Make sure your display has HDMI connectors if you want to experience the highest HD video and sound quality when playing video games. For best results, simply use the method of connecting Xbox 360 to PC monitor with HDMI cable.

However, because outdated displays do not support DVI or VGA, we have offered alternative techniques to assist you. Instead, just follow the extra instructions for connecting an Xbox 360 to a computer monitor through VGA HD AV or component HD AV connections. Finally, follow the instructions carefully to enjoy high-quality video game streaming.

See more :


How to Fix Monitor Ghosting

Best Chromebook for Zoom Meetings

Best 34 inch curved monitor for work

7 Jul, 2022

Connecting Two Bose Speakers (Step-by-Step Guide)

Bluetooth speakers are perfect when you want to listen to music regardless of your location. They offer a straightforward wireless connection without compromising sound quality.

The disadvantage of a single speaker is that it is incapable of reproducing real stereo sound, which is produced by two separate speakers on the left and right.

You may pair two Bose SoundLink speakers to play in stereo or in unison. Here’s how to use the Bose Connect app to pair two compatible Bose speakers.

 Combining Two Bose Speakers

Using the Bose Connect app or speaker buttons, you may pair two Bose SoundLink speakers for simultaneous audio playback. Bose speakers can be paired in two distinct modes. In Party mode, both speakers play simultaneously, whereas Stereo mode separates the left and right audio channels. Want to improve your home audio? Then read our evaluation of the Bose Smart Soundbar 900.

Setting up Bose Party Mode using the AppThe Bose Connect app allows you to manage multiple Bose smart speakers across your home. Here’s how to switch the Bose Connect app into Party or Stereo mode.

  1. Rotate one of the two speakers you wish to connect.
  2. Pair your mobile device with one of the available speakers.
  3. Launch the Bose Connect application.
  4. To locate your Bose SoundLink speakers, swipe left.
  5. Tap the icon with two speakers.
  6. Select Proceed and allow the connection between the two speakers.

How to Configure Bose Stereo Mode Through the App

  1. Ensure your speakers are set to Party mode
  2. To switch to Stereo mode, hit the STEREO (L/R) slider button.
  3. To return to Party mode, hit the STEREO (L/R) slider button again.

How to Configure Bose Party Mode with the Speaker Buttons

The Bose speaker buttons approach permits pairing of two compatible Bose speakers without the need of an app. Here’s how to use the speaker buttons to enter Party or Stereo mode.

  1. Turn on the two speakers you intend to use.
  2. 2.Connect one of the two speakers to your smartphone, tablet, or other Bluetooth-enabled device.
  3. Press and hold the Bluetooth and Volume + buttons on the associated speaker until a voice can be heard.
  4. Press and hold simultaneously the Bluetooth and Volume – buttons on the second speaker until a tone is heard.
  5. A voice cue will indicate that your speakers are in Party mode. The sound from both speakers will begin to play simultaneously.

How to Configure Bose Stereo Mode with Speaker Buttons

Before you may switch to Stereo mode, you must go to Party mode.

  1. Press and hold simultaneously the Bluetooth and Volume + buttons until you hear Stereo mode on one of the speakers.
  2. A voice cue will indicate that both speakers are now playing in stereo by stating Left and Right.

How to Change Bose Modes Using the Speaker Buttons

To toggle between Party and Stereo modes, simultaneously press and hold the Bluetooth and Volume + buttons.

How to Turn Off Bose Modes Using the Speaker Buttons

To unlink the speakers, press and hold the Bluetooth button until a voice instruction is heard, or turn off one of the speakers.

Connecting Two Bose Speakers Presents Issues

If you are experiencing problems getting your speakers to play in Party Mode or Stereo Mode, check the following.

Connect each speaker individually

If both speakers are paired to a phone, tablet, or other Bluetooth device, stereo and party modes will not function.

Move speakers within range of Bluetooth

In Party and Stereo mode, the Bluetooth device connects to the first speaker, then the first speaker connects to the second speaker. Keep the speakers or devices within Bluetooth range, which is around 30 feet (9 meters), to avoid disconnection. Wi-Fi, microwaves, and baby monitors are examples of electronic devices that might generate interference. Once your Bluetooth device and speakers are in close proximity, determine if the issue has been rectified.

Keep software current

When using party and stereo modes, the software should be updated. When two speakers utilize distinct firmware versions, it can be difficult to connect them.

Rename speakers

When connecting two Bose SoundLink speakers of the same model, it is recommended to give them unique names for improved identification.

Remove speakers from the list of devices

The paired device list should contain a list of the speakers you have previously linked to your phone or tablet. Locate your Bose speaker and remove it from the list. You can do so by selecting the speaker and selecting Forget or a comparable option. After that, attempt to reconnect the device to the speaker.

Reset your speaker

Occasionally, your speaker may need to be reset to fix small issues. A reset can either restart your device or clear its settings, restoring it to its initial configuration. Follow these procedures to restore factory default settings:

This reset clears all settings and returns the device to factory defaults.
  1. Turn your speaker on.
  2. Press and hold the Power button for approximately ten seconds.
  3. The Bluetooth indicator will then begin blinking.
  4. A voice will then prompt you to select a language.
20 Jun, 2022

Do You Need HDR Monitor For Photo Editing

Any experienced photographer may legitimately wonder, “Do I need HDR for photo editing?”. Smartphones, which can now take HDR photos, have made HDR photography accessible to even the most casual of photographers. If you’re looking for the best PC display for photo editing, HDR may seem like a must-have feature. Before we go any further, let’s define HDR. An HDR image is one that has a wide dynamic range.

What is HDR?


HDR is the abbreviation for high dynamic range, and it refers to the way in which a device may display the difference between the darkest and brightest portions of a picture while still preserving the image’s actual colors and natural lighting. HDR stands for high dynamic range, and its purpose is to display images with lighting that is as true to life as it is possible to make it. The end result should be an image that is vivid and accurate to how the original content creator envisioned it. HDR brings the visuals on the screen to life by providing a broad color palette and great brightness; as a result, HDR capabilities are becoming increasingly common in today’s televisions.


What Are The Types of High Dynamic Range (HDR) Standards For Monitors?


On the market nowadays, you may choose from a number of different HDR varieties. The primary distinctions lie in the amount of brightness each one can display as well as the color palettes available. The following are the three displayHDR standards that were developed by VESA:

DisplayHDR 400: This reaches a maximum brightness of 400 cd/m2 and has a baseline brightness of 320 cd/m2. The amount of BT.709 color space that is covered by colors has been set at 95 percent.

DispayHDR 600: The brightness can be anywhere from 350 cd/m2 all the way up to 600 cd/m2 at its highest. At least 99 percent of the BT.709 color space and at least 90 percent of the DCI-P3 color space are covered by the color coverage.

DisplayHDR 1000’s brightness starts at 600 cd/m2 and reaches its maximum of 1000 cd/m2 at its brightest point. Additionally, the color coverage is at a level of 99 percent for BT.709 and 90 percent for DCI-P3.

In addition to these VESA standards, there is now something called the DisplayHDR True Black standard. TrueBlack monitors offer a greater contrast between the various levels of darkness, which contributes to an improvement in image quality. Therefore, a monitor will have features that are comparable to those of a monitor that does not have DisplayHDR True Black, in addition to having improved image quality and the ability to transition from light to dark.

What Will It Take To Use HDR on a PC Monitor?

As you consider if you need HDR for photo editing, you should see what it would take to get HDR on your PC monitor. Not just any monitor can handle HDR; it requires a few things. 

Graphics Card


To begin, you will require a graphics processing unit (GPU) that is compatible with high dynamic range (HDR). This indicates that the integrated graphics on your display or graphics card should be compatible with high dynamic range (HDR). You shouldn’t have any issues with HDR thanks to the fact that nearly all AMD and NVIDIA graphics cards are capable of supporting it.


Display Support


The second element that is required is a display that is capable of high dynamic range (HDR), which is typically stated among the specifications of the monitor. Either a label that says “HDR support” or a reference to one of the VESA certifications that are listed above will be visible to you. It is essential to keep in mind that high dynamic range (HDR) functionality can only be found in in-plane switching (IPS) and vertical alignment (VA) panels. Not the case with twisted nematic (TN) panels. If you want High Dynamic Range, then your choice of monitors will be affected by this.



The most recent ports that can connect to and transfer HDR video into your monitor are the third element that you will require in order to use an HDR monitor. As a result, the monitor you use must have a DisplayPort 1.4, HDMI 2.0a, or a more recent connection. Monitors with these types of connections are among the best monitors for picture editing that cost less than $500. When you have all of these things in place, you should be able to edit the HDR photographs that you have shot using Photoshop and other HDR image editing software.


What Are the Potential Benefits of HDR to Photo Editing?

Image Quality


HDR has the potential to significantly improve the image quality of your display. To begin, it will improve the brightness and chrominance of your image, resulting in pictures that are more vibrant and true-to-life. The amount of light that is emitted from a surface is what is meant to be measured by luminosity. Because luminance has an effect on the accuracy of color reproduction, the image quality improves along with the luminance. Chrominance is defined as the difference between a particular color’s representation on the screen and the same color’s standard representation when the brightness levels are equal.


Eye Safety


HDR images have a higher brightness and chrominance than SDR images because of this. As a result, your photo editing work will be more visible, allowing you to work more safely and efficiently. This means that visuals displayed on an HDR monitor will be vibrant and lifelike. A higher degree of color accuracy can be achieved with a larger range of colors on a DCI-P3 monitor. Color accuracy in photo editing is well-known to all of us. An HDR monitor will make your job as a picture editor easier because it allows you to precisely adjust and control colors for superb results.


Color Accuracy


Have you observed that areas with shadows or black color on SDR panels seem to have a noticeable blue tone? HDR displays, on the other hand, do away with that distracting hue entirely by rendering your images and shadows in a dark tone that is authentic and profound. Accurate darks and blacks at the appropriate brightness level improve the picture quality and produce an exact reproduction of the original image that was created. HDR monitors also feature a higher brightness, which contributes to the more accurate depiction of colors and hues. In addition, HDR monitors contain something called Stops, which prevent the brightness from going all the way through the screen.


So, Do You Need HDR For Photo Editing?


You are not required to have HDR software in order to edit photos. Monitors that are compatible with HDR typically come at a higher price point than equivalent displays that are not compatible. Therefore, unless you are very set on having HDR, you can acquire amazing monitors for photo editing for less than $200 that have great characteristics and do just as well of a job as the finest displays for photo editing do. In point of fact, serious gamers and probably video editors are the most likely to insist on purchasing HDR monitors for their computers.

On the other hand, if you have the financial means and the desire to get the most out of your graphics, you should unquestionably invest in an HDR display. Because of the related benefits, the quality of your work will be much improved, and there will be less likelihood of experiencing digital eye strain as a result of the high image clarity. Therefore, if you are in need of a new monitor for your laptop or computer and you have a little bit of additional cash, you should absolutely invest in an HDR monitor so that you can edit photographs.

See more :


Best 29-Inch Monitors


5 Jun, 2022

How to Tell if a Subwoofer is Blown

The subwoofer is an important part of a stereo because it boosts the bass and gives you a fuller sound when you listen to music. After a while, though, it starts to break down, and it doesn’t sound the same anymore. How to tell if a subwoofer is blown is the topic of this article. I’ll tell you how to test a subwoofer to see if it’s blown and how to fix a blown subwoofer.

Why does the sound from my subwoofer sound weak and distorted?

1.Too much power

This can happen when the subwoofer is turned up too high or turned down too low. The power rating with the most force shouldn’t be used for a long time. Even though it said the subwoofer could handle being loud for a long time when you bought it. It’s meant to be played every so often, not all the time.

The power of the tears pulls the voice coils away from the spider. This makes little or no sound.

You can also hurt the subwoofer by not giving enough power to the speakers. This makes the voice coils overheat and get stuck. And when that happens, you know your subwoofer is dead.

2.Signal messed up

Please don’t turn it up to hear it better when the signal is messed up, as this can damage the subwoofer. It’s usually made worse by the fact that you might not be able to hear the distorted signal until you’ve turned it up too high and done damage.

It is important to look at the subwoofer to figure out how much damage has been done. When a subwoofer blows, different kinds of damage can happen. You can learn how to do the tests without making the broken subwoofer worse.

How to find out if a subwoofer is dead

1.Pay attention to the noise

The sound you hear will tell you right away how much damage was done. Play some audio at a low volume, then slowly turn up both the volume and the bass. Listen for any changes in the sound quality. Check to see if you can hear cracks, pops, and static in general. Different sounds mean different things. For example, if there is no sound at all, it could be that the subwoofer is completely broken. If the audio signal is coming into your sub through a cable, check first before ruling out anything.

Partial sound with distortion: If you play at any volume and hear a weak and distorted sound, it means that your subwoofer is partially broken.

2.Check the cone of the speaker

Since the speaker cone is suspended, it should be soft and easy to tear. Checking the speaker cone is the easiest test because you only need your hands to do it, but you do need to pay attention. First, take off the cover so you can reach the cone. Then, carefully move the cone with both hands, but don’t use any force.

This could be because the voice coil is broken or stuck. It means that it’s gone.

Unstable cone: If the cone moves around in an unsteady way, the suspension system might get in the way.

Sounds that are rough or scratchy mean that the damage is already done and the cone needs to be replaced.

3.Check the voice coil of the subwoofer

A subwoofer’s voice coil is usually attached to the cone and has both negative and positive ends. It makes the electricity that goes to the speakers stronger. For this test, you’ll need a multimeter, which measures electrical resistance.

How to use a multimeter to check if a voice coil works

Taking the subwoofer away from the power source.

Pull the cables out of the audio inputs.

Take the sub out of the cage.

Connect the two probes to the multimeter.

To measure the ohms, turn on the multimeter.

Put the black probe on the negative lead and the red probe on the positive lead.

By now, the multimeter should be able to tell how much resistance there is. Round it up to the nearest whole number for the correct resistance.

The results can be understood as;

  •  No resistance/infinite resistance – damaged voice coils.
  • Changing readings; voice coil is completely broken.
  • If the reading is above 1.0 ohm, the voice coil works.

If you think your subwoofer is broken, the first thing you should do is take it out of your car. The audio equipment gets worse the longer you stay there. Next, you can see if your warranty is still good and get it fixed or replaced by the company that made it. Before you open it, do this. After that, you can call a repair person.

How to fix a subwoofer that’s broken

If the subwoofer fails the tests, you can decide to buy a new one if the one that failed was old. You can fix the old one if you don’t want to buy a new one. To fix a subwoofer that has blown, you have to try to fix different problems, such as;

1.Subwoofer cone and coil

  • Take away the talker.
  • Cut the spider out.
  • Take off the voice coil and the seal, and clean up any dirt or dust.
  • Take off the wires and solder.
  • Align the new coil with the ends of the wires.
  • Stick the spider back where it was.
  • where the glue was put on the gasket.
  • The speaker cone needs to be put in the right place.
  • Place the lead-out wires against the cone.
  • Connect and thread the lead wires.
  • The dust and cone cover should be put back on.
  • Put the lead wires in the basket terminals and solder them.
  • Check it out after you changed the driver.

2.Foam surround

  • Take the seal off of the frame.
  • Cut off the part of the subwoofer that was broken.
  • Use alcohol to get rid of the residue.
  • Put the new foam around it.
  • Place the new foam ring and give the glue time to set.
  • Put the gasket back on.


  • Get a paper towel and some glue for the speaker dust cap.
  • Use glue to cover the hole in the paper towel.
  • To avoid making a mess, the paper towel should be smooth and one piece.

4.Stuck voice coil

  • Look for a flashlight or something else round.
  • Put the coil back where it belongs.
  • Check to see if it works.


Before deciding that a subwoofer is broken, the first thing you should do is test it and figure out which part is broken. Then, you can decide to fix it quickly with things you already have, call a technician, or buy everything at once. Using the steps and procedures we’ve talked about above to fix it would be the cheapest way, of course.

Buying the best subwoofer on the market can save you a lot of stress and give you a longer time to enjoy good music in your car. Here are our three best subwoofers, all of which I’d recommend.

  • MTX Audio Terminator Series TNE212D
  • BOSS Audio Systems CXX8 8 Inch Car Subwoofer
  • Skar Audio SDR-10 D4 


3 Jun, 2022

How to laser flip on a skateboard?

The laser flip is one of the hardest tricks ever made for a skateboard. Find out how to do the advanced level move well.

Ready to figure out how to do a laser flip? I don’t see this trick done well or at all very often. When I ask people if they can do a laser flip, they usually say, “Oh, that trick is too hard” or “It takes so much energy from my legs.” I’ve done this trick before, so I can tell you that you need to know a lot of complicated steps and tricks before you try to learn or master it.
Now, how do you do a laser flip, and what is it? A laser flip is done by putting together a 360 frontside shuvit and a varial heelflip. Rodney Mullen came up with it. He was also the one who came up with the ollie.
The laser flip is a trick that is hard to do. Go back and learn how to do a varial heelflip and a 360 frontside shuvit if you haven’t already. This trick, too, will take a lot of work. Remember to keep going. You can do it!


The hardest part of learning this trick is finding the “sweet spot” and the right mix of shuvit and flick to keep the board under your feet, make it spin, and then catch it.
What does “sweet spot” mean? By “sweet spot,” I mean where your feet should be. This is different for each person, but the most common way I’ve seen it done is to put your front foot in the middle of the board, with your heel on it and your toes hanging off the side.
The back foot is next. It’s a lot like a heelflip or a varial heelflip. You’ll want to put your foot on the tail pocket with your toes pointing 45 degrees away from the board (to the right if you have regular feet or to the left if you have goofy feet).


To learn this trick, you need to follow some steps and know a few tricks. The most important move is a varial heelflip. Why is this trick important to know? Well, it’s the best trick to know before you try to laser flip.
It would be like trying to learn how to kickflip or heelflip without knowing how to ollie, balance, or ride a skateboard well. Once you can do a varial heelflip easily enough to land it 8 out of 10 times, it will train your body to know how to land a “smaller” and “easier” version of a laserflip.


Now let’s talk about the timing and how to find the right amount of flick and shuv. When I see people try out this trick, this is a big and common problem. Most of the time, I see people flick too hard, not hard enough, or not give enough power to the shuvit part. These are the two most difficult parts of learning this trick.
First of all, it seems like an odd time. For example, when you’re doing a kickflip, all you think about is popping, flicking, waiting for the board to flip, and catching the board. But for this one, you’ll have to wait for the board to start turning. When it gets to a 90-degree angle, that’s when you flick.


This trick is kind of like a treflip (a 360 kickflip), but the flick and front foot are less important than the back foot and shuvit. Give your back foot more power and get used to making the board spin all the way around. The best way to get better at this is to step off the board with both feet when you shuv it.
Keep working on that part, and once you have it down, try to land a 360 front shuvit with one foot and stepping off with your back foot. As soon as it starts to spin, put your back foot on the ground and catch the board with your front foot. Then, when you know how to do that step well, you add the heelflip.
This will help your muscles get used to the amount of force and timing needed for the trick. The same steps are used here: step off with your back foot and land on your front foot until you get used to it.

Common problems

People also miss a lot of small problems that are very important when they are trying to learn laser flips.


For example, when setting up for the trick and trying to catch the board, your feet could be too close together. The best way to fix this is to try different places to put your feet.
Just like with anything else in life, if trying to copy someone else’s method doesn’t work, use what you’ve learned and try to find your own way to do things. Keep moving it around until it starts to stay in place under your feet. Then the only thing left to do is land the trick.
When you try to catch the board and it flies behind you, that’s another example. You might be going forward instead of up when you jump. That’s easy to fix—just try to jump straight up when you try to land the trick.
Also, when flicking, you should bend your front ankle and flick in the direction of the rotation instead of forward and in front of you. If you don’t, you’ll probably end up slowing down or stopping the rotation all together. This goes along with the step of finding the right balance between flick and shuv.


Going fast is another thing that seems scary but makes things a lot easier. This helps a lot when you’re doing laser flips on flat ground. Getting back to basics also helps a lot. Like doing a few front shuvits and different heelflips before doing laser flips, which are a battle.


Lastly, all you have to do is practice all of these steps and put them together to get both the rotation and flip for the trick. Keep going, never give up, and you’ll be able to laser flip like it’s nothing in no time.
It might take weeks or even months, but it will be worth it once you get it. When you get good at this, you might be able to do it on drops, stairs, and in and out of grinds and slides.


When does a laser change the direction of rotation, but the board stays far behind? how to fix it?

Try turning your front foot in so that your toes point toward your back toes, which will be pointing straight out. So, you won’t have to put as much energy into your back foot and your board won’t go behind you as much.

25 May, 2022

Top Electric Skateboards With Handles. Easily Carry Your Board!

In the history of skateboarding, every skater has had to carry their board.

It’s no different for e-skaters.

We really wish that more brands would put handles on their boards.

It’s an easy thing to add to any board, but if you have to choose between two similar boards, one with a handle and one without, it’s obvious that you should buy the one with a handle.

Why You Need A Handle On Your E-board

Let me tell you, carrying an electric skateboard that weighs 15 to 20 pounds (and sometimes even more) is a pain in the rear. Even though that weight may not seem like much, it is.

This dumbbell doesn’t have a nice shape…

Electric skateboards are long, ungainly, and hard to hold. Since the board doesn’t have a handle, you have to carry it by the trunks. And let me tell you, if you carry the board for more than one block, you’ll start to feel it.

Your hands start to hurt, your arms get tired, and your posture starts to get worse.

It’s a great way to get in shape, but it’s not the best way to get to work every day.

So, we’re going to tell you about the best electric skateboards with handles.

The handles are handy and make it easy to carry the board with just one hand. It makes your board more like a briefcase and makes the weight easier to carry.

Meepo With Handles

Meepo AWD Pro

There’s a reason it’s called “All Wheel Drive” (AWD).

Four… that’s right, each wheel has its own 540-watt motor. All together, that’s 2,160 watts.

With so much power, it’s no surprise that this board can go as fast as 34 mph and has a range of 15 miles.

The coolest thing about this board, though, isn’t that it has one handle—it has two! Yes, the deck has two metal handles, one on each side. You’ll need them because this board is 23 pounds (Yikes!).

Meepo V3

This board’s top speed of 28 mph and standard battery range of 11 miles are great, but the price is what really kills the deal.

Yes, this board costs $379, and its stats are better than those of e-boards that cost three times as much.

Oh, and it has a nice grooved handle that is built right into the design of the deck. Even though 16 pounds isn’t the heaviest, a handle will make it feel like it’s only 8 pounds.

Meepo City Rider

This board is made for the city, as the name suggests. But let’s be honest: the city is a bad place. So rough that even the City Rider’s 6-inch wheels can’t handle it.

You might have to carry the board there.

You’re in luck, because the City Rider has the same kind of metal handles as the AWD Pro.

Both of the handles stick out from the side of the board, but they don’t get in the way of you or your ride in any way.

Oh, and I forgot to say that this board goes 15.5 mph and can go as fast as 22 mph, and it only costs $679. Not too bad!

Ownboard With Handles

Ownboard W1S

This is the most popular Ownboard. If you want to know why, it’s because the board costs only $379.

You’re right! Get one, two, three, or as many as you need for your whole family.

Well, why not? It competes well with a top speed of 25 mph and a standard range of 12 miles.

This board is easy to move around because it has a nice handle built into it.

Ownboard W2

Even though it costs $529, this board is still very cheap.

This longboard-style electric skateboard has a 38-inch deck and can go as fast as 28 miles per hour. However, the standard range is only 7.5 miles, unless you pay an extra $100 to upgrade the battery.

The cool thing is that on the product page, you can choose whether or not the board comes with a handle, which is a pretty easy question for all of us to answer (HAHA!

Ownboard C1S

When you first look at the C1S, its deck shape and colors make it look a bit like an Evolve Carbon GTR. Just take out the fact that a large oval handle is built into the board…

But it’s not even close to the same price. It only costs $379! A top speed of 25 mph and a standard range of 12 miles go well with the price.

Even though it looks big on the website, this board is only 35 inches long in real life. (there’s nothing wrong with that).

Ownboard W1AS

Looks like a regular skateboard until you get close enough to see that the bottom has a battery pack.

It has the same specs as most other Ownboards, with a top speed of 25 mph and a standard range of 12.5 miles. Oh, and how much?

You were right, it was $379.

Just remember that this board has a stiff deck if that’s what you like. (I like flexible longboard decks because they are easier to handle and steer.)

WowGo With Handles

WowGo KT

The WowGo KT is a stiff deck board with a 35-inch width that is a good size for simple commuting and traveling.

It has a range of 12 miles, goes 23 mph, and costs $379. It also has a nice handle.

WowGo isn’t the most famous, but it sure can walk the walk!

WowGo 2S

A board that’s pretty much the same as the Ownboard W2. I swear that these companies are stealing ideas from each other, or that they are all made in the same factory and just have different logos slapped on before they leave…

You get the same price, speed, and range as the KT, but the deck is more versatile (longboard style).

I’ve tried this board a few times before, and I really like the bamboo and maple wood deck.


20 May, 2022

How does a rotary lawn mower work

When it comes to grass quality, the cutting systems are more significant than the lawnmower’s power source for the time being. Lawn mowers typically have one of two cutting methods.
There are anywhere from five to twelve blades on the front of a cylinder mower or reel mower that rotate like a pair of scissors, trapping and slicing the grass against a fixed bottom plate like a pair of scissors. The better the cut, the more blades there are. Foregrounding the box of grass.
The disadvantage of this cutting technology is that it only cuts short or low grass. For a decent cut, this calls for frequent mowing, ideally twice weekly, but at the very least once weekly throughout the growing season.
rotary lawn mowers have a single, extremely fast-moving blade at the bottom of the machine. A fast speed of the blade causes it to ‘chops’ the grass upon impact. The grass box is often attached to the mower after it has been cut, however some models come with a built-in grass box. These mowers are best suited for a medium to high-cut lawn.
Ride-on mowers and tractor mowers, which are merely larger versions of ride-on mowers, are available as alternatives. There are many types of hover mowers that are popular in the United States. Hand mowers, which resemble cylinder mowers but are powered by the user, are still in use by some people.

Quality of Grass Cutting

Cylinder mowers are superior to rotary mowers because of their cutting motion, which is similar to that of a slicing “scissor” blade. When you consider all the other defects in the lawn, most people won’t notice the difference between a rotary mower with sharp blades and appropriate power and a traditional mower.
Consider a bottle of wine as an analogy to better understand the ‘quality of cut thing.’ A bottle of excellent wine might cost anywhere from £20 to £30. If the wine is truly exceptional, the price per bottle could be as high as £200. How many of us were able to tell? It doesn’t matter if you have a nice rotary mower or a decent cylinder mower; the results are the same.

Mower Maintenance

A cylinder mower’s blades must also be adjusted on a regular basis to provide a consistent level of cut quality. If this isn’t done correctly, the mower will ‘chew’ the grass, resulting in a terrible cut that is even worse than a rotary mower’s. Because of this, cylinder mowers should be avoided by anyone who is not mechanically inclined or who does not want to fuss.

Mower Height Adjustment

In comparison to cylinder mowers, rotary mowers have a wider range and a different sort of height adjustment. If you have a good cylinder lawnmower, you can lift it up to an inch or so and still get good mowing results. Whereas, the cutting capacity of the standard rotary lawnmower can be increased to perhaps 3″ or even 4″ without compromising quality.
In order to stay under the “one third rule,” a cylinder mower’s small range of height adjustment frequently necessitates mowing at least twice weekly. In addition, the mower is able to function effectively and neatly as a result of this. In the height of the season, bowling and golf greens are often mowed every one to two days.

The one third rule: never remove more than one third of the grass lead on any one cut

It is possible to modify the height of the chair using either a screw thread or lever action. The number of settings controls how much the cutting height changes from one setting to another. Higher and lower cutting heights can be improved by having a wider range of cutting heights. Having a mower with five settings is nice, and having a mower with seven settings is even better. Ten or more settings are common in ride-ons.
Even if a lawn is of excellent quality, it will always be greener and healthier if it is trimmed at or above 1 inch in height due to its inherent flaws, such as surface irregularities, poor drainage, shading, trees and roots, and children and dogs.

This means using a rotary mower!

To avoid scalping, your lawn must be perfectly flat and composed of fine, bristle-like grasses. Lawnsmith believes that cylinder mowers should only be used by committed amateur gardeners and lawn aficionados, whilst rotary mowers should be reserved for everyone else.

See more : electricproductsreview